This classic brown kit is the rounded-profile generation of our pipe trunking. The wood-tone brown sits against brick, timber cladding and earth-toned render, so the run across a masonry facade reads as part of the building rather than a service line. It is the profile still specified on refurbishment work and by distributors holding classic stock.
| Component | Function |
|---|---|
| Straight Duct | The main trunking section that runs along the wall, carrying the refrigerant pipes, cables and condensate drain. |
| Coupling (Straight Connector) | Joins two straight duct sections end to end for longer runs. |
| Reducer Coupling | Connects duct sections of different profile widths on stepped installations. |
| 90 Degree Flat Elbow | Turns the duct line left or right within the wall plane. |
| Wall Entry Cap | Finishes the point where the line set enters the wall, hiding the penetration neatly. |
| 90 Degree Vertical Elbow | Turns the run from the wall down to a ground-level outdoor unit. |
| Adjustable Elbow | Swivel joint that covers angled turns between 0 and 90 degrees. |
| 45 Degree Flat Bend | Softens direction changes on angled facades and gutter lines. |
| 90 Degree Vertical Bend | Routes the trunking over obstacles in the vertical plane. |
| Side Entry Elbow | Guides the line set into the unit connection from the side. |
| Item | Specification |
|---|---|
| Colour | Brown |
| Material | Rigid PVC (UPVC), UV-stabilised, high impact resistance |
| Profile | Classic rounded ribbed profile |
| Available sizes | 110 / 130 / 160 mm |
| Installation | Wall-mounted, screw fixing, snap-on cover |
| Application | Mini split, ductless AC and heat pump line sets |
| Supply format | Complete kits or individual components, OEM/ODM available |
The classic rounded profile is produced in three widths. Trunking is PVC, fittings are PP and the flexible duct is food-grade PE:
| Component | Size | Dimensions A x B x C (mm) | Package quantity |
|---|---|---|---|
| AC trunking (PVC) | 110 | 2000 x 100 x 65 | 15 root/unit |
| AC trunking (PVC) | 130 | 2000 x 120 x 80 | 10 root/unit |
| AC trunking (PVC) | 160 | 2000 x 160 x 120 | 6 root/unit |
| Flexible duct (food-grade PE) | 110 | 950 x 98 x 60 | 40 root/unit |
| Flexible duct (food-grade PE) | 130 | 930 x 125 x 77 | 25 root/unit |
| Flexible duct (food-grade PE) | 160 | 810 x 160 x 100 | 15 root/unit |
| Wall cover (PP) | 110 | 215 x 106 x 72 | 40 pcs/unit |
| Wall cover (PP) | 130 | 255 x 128 x 86 | 40 pcs/unit |
| Wall cover (PP) | 160 | 250 x 160 x 120 | 24 pcs/unit |
| Straight connector (PP) | 110 | 65 x 107 x 51 | 60 pcs/unit |
| Straight connector (PP) | 130 | 80 x 125 x 88 | 60 pcs/unit |
| Straight connector (PP) | 160 | 120 x 160 x 80 | 36 pcs/unit |
| Horizontal elbow (PP) | 110 | 101 x 130 x 66 | 60 pcs/unit |
| Horizontal elbow (PP) | 130 | 128 x 205 x 86 | 60 pcs/unit |
| Horizontal elbow (PP) | 160 | 160 x 205 x 120 | 42 pcs/unit |
| Vertical elbow (PP) | 110 | 103 x 104 x 68 | 60 pcs/unit |
| Vertical elbow (PP) | 130 | 140 x 125 x 80 | 60 pcs/unit |
| Vertical elbow (PP) | 160 | 170 x 162 x 117 | 24 pcs/unit |
| End cap (PP) | 130 | 100 x 95 x 70 | 60 pcs/unit |
Q: Can I mix classic and current fittings on one run?
A: No. The classic profile is wider and rounder than the current series, so the fittings only match within the same generation. Order the classic kit and classic fittings as a set for any run that starts with classic duct.
Q: Are classic components interchangeable with the current series?
A: No. The classic profile is wider and rounder, so its fittings only match within the same generation. Order classic duct and classic fittings as a set.
Q: Is the kit suitable for outdoor installation?
A: Yes. The profile is UV-stabilised rigid PVC with high impact resistance, made for exterior walls in direct sun.
The southeast corner of the private entrepreneurship park in Huadian Town, Qihui County, Dezhou City, Shandong Province
